SYM Jet Euro X part problems

[aidanh1]

Hey guys I'm new the this forum and it seem'd the best place to get help with my moped

basically some very irritating f**k heads nicked my moped I got it back from the police but it was smashed in now the bodywork has been repaired but I have a snapped speedo cable no battery and the cylinder head is fudgeed there's no damage to the engine or electrical's and as I know of everything is in working order, now I cant find a cheap SYM jet cylinder head anywhere but my mate said I can have his old moped and take the parts off it for free (i know propa nice) anyway are most 50cc scooters the same in basic design so are the cylinder heads or speedo cables any different im asking because I havent got this other moped yet so though I'd ask if anyone has ever used parts from another moped of a different kind?

Cheers Aidan

[Rebel]

Welcome,

Do you know if it is a 139qmb? Is it a two stroke?
Along the left aide of the case there should be a string of numbers and lwtters that identifies the motor. Ifyou could get those it would be helpfull.

[aidanh1]

I just had a quick look and cant find these numbers or letters but at the moment it is naked and has no body panels on and most of the stuff has been removed to gain access to the engine and the electricals i do know its a 2 stroke engine and the back of the cylinder head has a few letters that i can only imagen the makers at SYM no what they mean lol

[Rebel]

Well there are some codes that are well known. If you have them you can fairly easily figure out the motor design and open up possibilities for resources. The numbers are usually along the side of the casting around or below the kick start.

[craisin]

I think its a 2 stroke.

I have a SYM Mio SS 50 its a 4 stroke I put a Suzuki racing clutch on it
I used the original pulley and the suzuki torque spring had to be shimmed to fit and the clutch bell needed a shim to stop hitting the clutch.

SYM parts are expensive and a little different than china scoots

They most likely stole it for parts

[felliott]

Do you fill the oil from under the seat? If you do it is a 2stroke.

[jmkjr72]

yeah sym does sell 2 strokes i just font think we ever got any in the us
and it is not a horizontal minerllie engine
im not sure what enigne they use i havent worked on one or even saw one

[Rebel]

Joe, he is in England, it could be a 2T, in fact his second post says it is a 2T.

[aidanh1]

yer england born and bread haha

but ye my old scoter i had was a very crap 4 stroke chinease one it got written off and this one is deffo 2 stroke still havent found these important numbers which sucks lol i cant remember the name of the bike im stealing parts off but does anyone know bike that are of simular design that might have simular parts im dangerous even if it dont fit properly i tend to make it fit properly eventually XD

(I Carnt Spel)

[Rebel]

see if it looks like this and check out the numbers this photo has.

If you can find yours is it a 1E40QMB? if so it is a minarelli 2 stroke.

[jmkjr72]

i dont think its a hm engine i went on scooter attack and the part number for the bbks they list are not hm bbks

[aidanh1]

hey guys its really frustrating me without taking the entire engine out i cannot find anything number wise ive looked and havent a clue where it is yesterday i had black hands when i finished lmfao but i cant find any i cant even find the sym jet euro X info on google its asif this bike is impossible to repair or find anything about it!

[Rebel]

Well as long as you can get parts for it you can kep it going. If you can. Post photos soembody might recogizewhat motor it has.

[jmkjr72]

check out scooter attack out of germany they have parts for your scoot
so im sure other euro dealers will have parts too
racingplanet also lists parts as well as sip

so there are parts out there for it

[craisin]

is this it?
I download PDF files for mine

Attachments: