|
Post by mattydonno2 on Jul 13, 2018 17:01:29 GMT -5
The spark plug threads stripped out on the head. I don't know what the millimeter size is for a replacement head or whether it has an EGR valve or not. I tried using J-B Weld to weld the spark plug in but when it gets hot it pops again under compression. The Helicoil kit cost more than a replacement header. Suggestions anybody know anything about the engine specs on this model?
|
|
jmkjr72
contributing staff
Commander 132nd Northern Cav. Division
Posts: 2,779
|
Post by jmkjr72 on Jul 13, 2018 18:16:07 GMT -5
You have 2 options helicoil or head replacement those are the only 2 options
|
|
|
Post by mattydonno2 on Jul 13, 2018 19:12:04 GMT -5
You have 2 options helicoil or head replacement those are the only 2 options I saw replacement heads cheaper than heli coil kits. Any idea what mm the head needs to be on that Make/Model? Trying to get it ordered, finding specs is near to impossible.
|
|
|
Post by mattydonno2 on Jul 13, 2018 19:14:38 GMT -5
Also, EGR valve ir no? Im no mechanic, but a friend is, he just isn't too knowledgeable when it comes to 4 stroke. You have 2 options helicoil or head replacement those are the only 2 options I saw replacement heads cheaper than heli coil kits. Any idea what mm the head needs to be on that Make/Model? Trying to get it ordered, finding specs is near to impossible.
|
|
jmkjr72
contributing staff
Commander 132nd Northern Cav. Division
Posts: 2,779
|
Post by jmkjr72 on Jul 15, 2018 17:33:54 GMT -5
I have no idea
|
|