bluefront
Recruit
Modded Xingyue ITA150
Posts: 67
|
Post by bluefront on Dec 15, 2010 17:48:37 GMT -5
The bore on the 150 is 57mm......the 200 is 62 mm. That's going by the model numbers for the engines. The 200 engine is #XY162, the 150 is #XY157.
|
|
|
Post by Rebel on Dec 18, 2010 14:50:06 GMT -5
scappy has some good prices, I don't think he has a lot of belt sizes to choose from though if you are trying to tune your trans.
|
|
|
Post by Rebel on Dec 31, 2010 14:34:47 GMT -5
I was just checking and it looks like the BMS bike you ride is not CARB approved but the Znen I posted above is CARB certified, so if you are in Calif, the Znen is your only 16 inch wheel version you can go with. I'd love to hear some comments from people about there impression of that bike. perhaps I'll have to see if I can ride one and comment on its performance anyway.
|
|
bluefront
Recruit
Modded Xingyue ITA150
Posts: 67
|
Post by bluefront on Dec 31, 2010 18:26:17 GMT -5
Than Znen scoot looks a lot like a Roketa MC-12-150. I've never paid much attention to cal-approved scooters. I feel real sorry for anyone who lives out there......so much crap to deal with. Here's a Roketa.
|
|
|
Post by Rebel on Dec 31, 2010 19:19:25 GMT -5
another "not for California" scooter. Roketa has a real problem in this state
|
|
|
Post by Rebel on Jan 10, 2011 16:19:17 GMT -5
a source for parts(some parts) for the 16 inch wheeled GY6 here
|
|
bluefront
Recruit
Modded Xingyue ITA150
Posts: 67
|
Post by bluefront on Jan 11, 2011 4:40:06 GMT -5
^^^^^That's Scrappydog's other site, unless I'm mistaken. You still need be careful ordering engine parts for your 16" wheel scoot. It's not always clear if the engine part listed will actually fit this slightly different GY6.
|
|