|
seafoam
May 20, 2010 16:32:08 GMT -5
Post by montanarider on May 20, 2010 16:32:08 GMT -5
So now that winter is slowly leaving western Montana, I had a chance to ride the scoot to work for the first time this year. Last fall I added about 1/2 a can of seafoam to the gas tank( I do this to lawnmower too). The scoot seems to have a little more get up and go than it did last year. Just wondering if anyone else out there uses this stuff too.
|
|
|
seafoam
May 20, 2010 17:02:11 GMT -5
Post by Rebel on May 20, 2010 17:02:11 GMT -5
I use it, but a half a can seems like a whole lot of the stuff. An ounce to the gallon is more then enough according to the directions I think.
|
|
jmkjr72
contributing staff
Commander 132nd Northern Cav. Division
Posts: 2,779
|
seafoam
May 20, 2010 18:13:18 GMT -5
Post by jmkjr72 on May 20, 2010 18:13:18 GMT -5
yes 1/2 a can is very excessive unless you have a big tank i use it on my personal stuff and i use it in my shop all the time the big plus to seafoam is it is one of the few additives that is safe for 2 strokes
|
|
|
seafoam
May 22, 2010 12:51:15 GMT -5
Post by montanarider on May 22, 2010 12:51:15 GMT -5
it's a big tank, and winter here means a lot of days of -10, -20, or worse
|
|
|
seafoam
May 22, 2010 12:57:44 GMT -5
Post by Rebel on May 22, 2010 12:57:44 GMT -5
I think my can of seafoam is 20 ounces, it is at least 16 anyway, so a half a can would treat at least 8 gallons, I don't know of any need to use more in cold temperatures.
In the end, if it is running fine no harm done.
|
|