FootScoot
Non-Com
Staff Sargeant, Mid-Western 2 wheel Mechanized Volunteers
Posts: 135
|
Post by FootScoot on Mar 6, 2010 8:43:40 GMT -5
I removed the rear wheel a couple of weeks ago, and now I'm not positive as to where the spacers (2, 1 long, 1 short) go. It's a 150 Sunl twin rear shock setup with the swingarm on the right side. I do know these go on the swingarm, but I'm not sure which one goes where? I guess I should have marked them, but didn't think about it at the time.  |
|
shiftless
Non-Com
SFC Indy, IN, 2nd DIV, So. Symperthisers
Twist n Go !
Posts: 177
|
Post by shiftless on Mar 6, 2010 12:59:48 GMT -5
The widest 1 goes between the wheel and swingarm, the narrower 1 on the axle between the wheel and nut
|
|
|
|
Post by Rebel on Mar 6, 2010 13:07:42 GMT -5
Pictures my friend. Take pictures of what things look like before you take apart or forget where they go, on things like this mark them right or left so you know what side they go to.
I bet that if you put it together you will be able to tell by the way it looks if you have it correctly assembled.
|
|
FootScoot
Non-Com
Staff Sargeant, Mid-Western 2 wheel Mechanized Volunteers
Posts: 135
|
Post by FootScoot on Mar 8, 2010 8:51:41 GMT -5
Thanks guys. I figured it would only go together one way. Long between swingarm and wheel. Short on outside of swingarm.  It's actually looking more like a scooter now, with all its pieces being replaced where they were. Will take pics when done. ;D |
|
