Front wheel and tire install

[FootScoot]

What a PITA! This is difficult if you don't have it up in the air, as you have to watch the speedo cable position, the brake pads, caliper, and spacer. Then with all this in limbo the axle has to be put in. It's all in there now. Just hope it doesn't have to come off any time soon. Now on to the back wheel.

[Rebel]

It gets easier each time you do it. I don't know how you lifted the front of the scooter, but here is a thread with a suggestion.

scooterrebels.proboards.com/index.cgi?action=display&board=alternativescooting&thread=156

[FootScoot]

That's a great idea! Only thing is the back tire and wheel was off, and so were the shocks, of course it would have still worked, if I had that setup. I guess I should build one. Those straps would also hold the forks still too. Rear rack to handgrips, and no more movement.