Post by rickoner on Feb 6, 2010 15:11:53 GMT -5
hello. i guess i'll start off with a little background on what i've been messing with. i picked up a honda ruckus from a guy who bought it at an auction. it was a theft recovery that was in pretty poor condition. it barely ran and had some wiring modifications i.e. hot wired. this really didn't bother me because i was looking to do an engine swap anyways.
well i came upon a komoto 250cc scooter for a decent price, so i picked it up for my donor. it ran perfect and didn't have any problems at all. unfortunatly one of my best friends was tragically killed half way through my swap. i hurried up and through the wiring together so i could ride it during his funeral procession because he loved the project. from not taking my time and sorting everything out it had a problem that kept popping the main fuse. i let the scoot sit for a few months then started redoing the wiring. i wanted to add a fuse box in so everything would be on it's own circuit. after tearing the harness apart life got in the way again and after 5 or so months i can't figure out what the hell i was doing.
it's a cn250 clone and i've been searching for about two weeks for a schematic to follow but can't seem to find the right one. my main problems are the wiring for the regulator, cdi, and stator. i was hoping that someone might have a diagram or to guide me in what wire does what. if you need more info let me know. i could also take pics of the parts/connectors if that would help.
thanks in advance for any help you can give.
well i came upon a komoto 250cc scooter for a decent price, so i picked it up for my donor. it ran perfect and didn't have any problems at all. unfortunatly one of my best friends was tragically killed half way through my swap. i hurried up and through the wiring together so i could ride it during his funeral procession because he loved the project. from not taking my time and sorting everything out it had a problem that kept popping the main fuse. i let the scoot sit for a few months then started redoing the wiring. i wanted to add a fuse box in so everything would be on it's own circuit. after tearing the harness apart life got in the way again and after 5 or so months i can't figure out what the hell i was doing.
it's a cn250 clone and i've been searching for about two weeks for a schematic to follow but can't seem to find the right one. my main problems are the wiring for the regulator, cdi, and stator. i was hoping that someone might have a diagram or to guide me in what wire does what. if you need more info let me know. i could also take pics of the parts/connectors if that would help.
thanks in advance for any help you can give.
