|
|
Post by Rocketdog on Oct 28, 2009 19:17:58 GMT -5
I finally found a good deal on 2 50cc scoots. I have to drive a little ways to get them but, no worries. Look out Kilff, Enviromoto, and 90GT. Indy, fall, title run. Put up or drink lots of beer  . RD |
|
|
|
Post by Enviromoto on Oct 28, 2009 22:29:31 GMT -5
Hey sounds good man. Kinda scary you gotta go meet Bubba to get them  |
|
|
|
Post by Rebel on Oct 29, 2009 0:38:45 GMT -5
Go Rocketdog,
Somebody has to put those three in their place.
|
|
|
|
Post by kliff on Oct 29, 2009 5:15:32 GMT -5
Alrighty then! I can see someone might be in need of some head work, lessen you're gonna do it yourself, Gears....these are gonna be the HOT set-up, I can see that coming!
2 more 1b entries.... this is getting good. The 1b class, due to low initial investment just might be THE class this first season. The more the merrier.
RocketD (x2)
Enviromoto
the mathclub(?)
tstubbs(?)
Me
That's a possible 6 already. If we could get 20 in that one class, for the first showing.....whooooooooeeeeee, that would be awesome.
|
|
|
|
Post by kliff on Oct 29, 2009 15:22:17 GMT -5
Gonna be building up some 50cc racers RD....better join up with the NASRA!
Doug understands...he set up the site....LOL
|
|
|
|
Post by Rocketdog on Oct 30, 2009 3:35:34 GMT -5
Nice site guys. Well done. I'll join right up. I bought the yellow one for a good price. Practically brand new, only has nine kilometers on it and still has Chinese fish oil in the sump. Just might take you up on that Kliff. Thanks.  The only drawback is this.  I'll look around for a basket case and a aluminum wheel. Maybe convert it to disk. RD |
|
|
|
Post by kliff on Oct 30, 2009 5:54:20 GMT -5
Yup, look for as complete a front end as you can find, to do the disc conversion, but if you have to "piece meal" it, I've got the 10" wheel w/tire that came off my VIP, possibly another 12 or 13 tucked away....I'll have to check on that one. When you start going piece by piece, is when you're gonna find lots of small differences, axle & wheel bearing sizes, spacer legths......you name it....nothing major, just sometimes when it looks like it should fit, it won't, unless you change this, which means you need that......LOL.... its all fun to me though. Jig saw puzzle, where the rules allow me to trim the edges to fit!
Start your build thread on NASRA, glad to see you there too.
And no, we ain't deserting Doug and the Rebels. This is HOME, the NASRA is a passionate hobby. We are allowed both....LMAO!
!2 or 13" will give you a better roll out, at least evry other form of DRcing seems to prefer talled frts for that reason, on the lights.
|
|
.
CAN YOU HELP ME OUT MAN,AS i LOST ME JOB DUE TO NOT BEING ABLE TO GET THERE?ANY INF