Post by rangeballs on Jun 17, 2015 18:27:36 GMT -5
Hi, I am new to the scooter world and bought a used Jet Euro X 50cc scooter and in the process of trying to get it running. It was in pieces so I am assembling it back together. I am having 2 issues that I hope you guys can help out. I downloaded the sym service manual and bought a Haynes scooter repair manual but not enough pictures to help me out.
1. Where does the vacuum for the fuel pump come from? I read in the one of the manual it is from the crankcase but cannot find where it could be. Some pictures may be helpful for me.
2. I think the carburetor is missing a connector that is on top of the idle speed adjustment screw. I am not sure what that connector should be and where it is connected to from the carb. Again any pictures would be helpful.
Thanks in advance.
1. Where does the vacuum for the fuel pump come from? I read in the one of the manual it is from the crankcase but cannot find where it could be. Some pictures may be helpful for me.
2. I think the carburetor is missing a connector that is on top of the idle speed adjustment screw. I am not sure what that connector should be and where it is connected to from the carb. Again any pictures would be helpful.
Thanks in advance.
CAN YOU HELP ME OUT MAN,AS i LOST ME JOB DUE TO NOT BEING ABLE TO GET THERE?ANY INF