|
Post by jontaccona on Oct 26, 2013 1:34:47 GMT -5
|
|
|
Post by slanteyedstoner on Apr 10, 2014 17:02:15 GMT -5
I'm not sure if you ever got this figured out since the thread is kinda old. But the 4pin is for headlights. An extra plug for other types of headlight units. Probably becuz the harness is for multiple types of scooters.
Sent from my Modded Android using Tapatalk 2
|
|
|
Post by slanteyedstoner on Apr 10, 2014 17:05:39 GMT -5
And the looped wire is a alarm jumper for ignition cutoff. If you have an alarm system installed that loop wire would not be there. The alarm system would be plugged into that connector. Without that jumper your Scoot would have no ignition/spark.
|
|
|
Post by Rebel on Apr 10, 2014 17:41:12 GMT -5
Thanks.
|
|