SHORT CASE GY6 KICKSTART REINSTALL?ANYONE DONE THIS?HELP PLZ

[gy6forlife]

I have had the CVT cover off (the side with the variator and belt) and I need to know how to
get it back to where if the new battery I have was to mess up I need to be able to be able to
kick start it with the original configuration.Anyone have a link,I looked on YouTube and cant find
a true gy6 short case or long to show me how to rewind the spring and put the 4 items back
to factory specs?Any help is greatly appreciated.
Kind Regards,
Jason/gy6forlife

[gy6forlife]

Seriously?No one here has had there kick starter apart,or no of a
link that shows how to do it?Really?Send PM if want?
Thanks,
Jason

[ldrancer]

is the crap stil thru the case? just sort of set the spring back on there, and put that other thing. i dont kowwhat you got. the thing through it, is a bar, and it has a c-clip to hold it on . i guess. if its like honda. should be.

[Deleted]

Apr 10, 2013 22:47:55 GMT -5 gy6forlife said:

Seriously?No one here has had there kick starter apart,or no of a
link that shows how to do it?Really?Send PM if want?
Thanks,
Jason

?

My 200cc16 inch has a atv size clutch and kicker on a geared down long case, I use it all the time to start bike, take a picture of your set up and post, their are a few different kinds


the half moon and  3/4 moon have to be set just right, you must grease all post holes and make sure your bushings are greased inside and out, never push kick start without cover on tight

Rebel has some great pics









grease these below and if your battery is not charging get a new regulator

[Rebel]