|
|
Post by suddethtray on Jan 29, 2013 23:32:08 GMT -5
i still have no fire to the plug but i can take other scooter and use my coil,cdi on it and it fires right up  also tried 3 difrint stators |
|
|
|
Post by Rebel on Jan 29, 2013 23:42:38 GMT -5
It has to be a wiring issue,or something simple like the kill switch is in the don't run position.
|
|
|
|
Post by terrilee on Jan 30, 2013 8:24:46 GMT -5
Im not totally awake yet, but did you say you changed the stator / magneto 3 x's??? , im foggy here , but what about the pick ups on the stator, have you checked the rectifier / regulator? yet
|
|
|
|
Post by suddethtray on Jan 30, 2013 9:31:12 GMT -5
yes ive stator and pick up coil 3 time im bout to post some pics or video
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 30, 2013 12:07:47 GMT -5
1. be sure not to over heat your starter motor trying to start it.
2 un screw both plug connector and where spark wire attaches to coil and make sure you have wire not cut too short in side.
3 check wire to coil for feed.
4 with a wire with alligater clip on both ends you can by pass start switch
5 do you have a kick stand kill switch? -by pass it.
6 check wire harness around area that move when turning steering column
7 patience is the best detective.
|
|
|
|
Post by rocky88 on Jan 30, 2013 13:24:25 GMT -5
check the ground and all the safety switches like kick stand switch..............rocky88
|
|
|
|
Post by suddethtray on Jan 30, 2013 14:19:18 GMT -5
haven't thought about that also i got a weak spark out of the plug a few min ago.then i cut switch off then back on and it blowed the fuse .x wire some where
|
|
|
|
Post by suddethtray on Feb 1, 2013 4:19:13 GMT -5
haven't thought about that also i got a weak spark out of the plug a few min ago.then i cut switch off then back on and it blowed the fuse .x wire some where finaly got it runing qwooooooooooooooo |
|
