|
Post by suddethtray on Jan 3, 2013 22:09:52 GMT -5
OK i have power to all lights and controls but i have no fire to plug and i"vie never really known how to use a multimeter anyone have any advice Attachments:
|
|
|
Post by gy6forlifelol on Jan 15, 2013 11:00:05 GMT -5
Find your original CDI,ignition box,and buy a new one,making sure that the pin configuration is the same as the one you order,Scrapp dogg,is a great site and are fast deliver with outstanding service,More than likely that is why you dont have any spark at your plug. jts
|
|
|
Post by terrilee on Jan 15, 2013 11:07:10 GMT -5
um get a new plug 1st then make sure it fits tight in plug cap, trace that wire to the cdi to make sure its connected well. then check to solenoid. then check for 2 grounds from the engine to the frame, and batt to frame.
check all that before u spend $$$
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 20, 2013 4:08:07 GMT -5
um get a new plug 1st then make sure it fits tight in plug cap, trace that wire to the cdi to make sure its connected well. then check to solenoid. then check for 2 grounds from the engine to the frame, and batt to frame.
check all that before u spend $$$ DITTO GO TERRI LEE also sand your coil males and then pinch back part of femail pinch connectors to the coil
push strainght on
power to the lights means nothing if you are running them off battery, did your head light only come on when engine was running, if so then its off the rotor, also first thing change your pick up on rotor.
CDI capacitors wear down like tires, get a new one, bike will run better even if old one works half way
|
|
|
Post by suddethtray on Jan 27, 2013 23:03:16 GMT -5
OK I've checked all my system on other scoot they work got a new wiring harness. still no fire to plug but my switch has black wire that broke so u think that's what it is.so i took switch apart what wires do i put together on a toggle switch
|
|