|
Post by capt1992 on Aug 2, 2012 15:43:10 GMT -5
First of all, thanks to all who helped out with my carburetor questions. This time I'm trying to find out if anyone knows where I can get a diagram of the vacuum lines for this scooter. There is a canister on the right side with 3 lines leading from it and 1 has apparently come loose and melted against the exhaust. It's about 3/8 to 1/2 inch in diameter and has a spring clamp on it. The clamp is about a foot from the end and looks like it wasn't attached when this thing was assembled. It's drawing a vacuum and if it's blocked the scooter runs bad. Any ideas?
|
|
|
Post by Rebel on Aug 3, 2012 2:26:14 GMT -5
not exactly what you are asking for but I'm having trouble finding what I was looking for, perhaps this will help a little
|
|
|
Post by capt1992 on Aug 3, 2012 7:49:52 GMT -5
I think this might show the line I need. There is an opening in the inlet pipe that the line might fit into. Thanks!
|
|
|
Post by capt1992 on Aug 6, 2012 5:33:09 GMT -5
Thanks Rebel! The missing line needed to go to an opening in the inlet tube. The drawing you posted helped alot. Thanks again!
|
|
|
Post by Rebel on Aug 6, 2012 11:02:46 GMT -5
Glad I could help.
It would be vreat if you posted photos of your system.
|
|