|
Post by Mystic on Jul 5, 2012 21:08:37 GMT -5
Here is my 86 Honda Spree with af16 elite engine swapped. I have a 43mm tai high compression bore with a aftermarket manifold like the CT chrome but uses the stock reed cage with daytona reeds,21mm oko carb, prodigy vari 9g rollers, 9.1 gear upgrade, and kymco zx pipe It has a custom made shock mount and side stand made by RD34 Custom Fabrication out of Las Vegas NV. I also cut the stock forks and welded the forks from a 94 elite 50 on and modified the handlebars to fit a honda Eve headset that I ordered from Japan Attachments:
|
|
|
Post by Mystic on Jul 5, 2012 21:15:49 GMT -5
Here is my other 86 Spree that I got tired of messing with the stock motor so I swapped it out for a 94-97 honda elite engine all stock except i replaced the stock carb with an arreche 17.5mm for honda vision, put in a SEF ramp plate and oil pump plug from VT Cycles. This time I attempted to copy the motor mount that I had made, doesnt look as pretty but it hasnt broken yet This is an early pic before i found a black glovebox and cut the panel to install a stock airbox Attachments:
|
|
|
Post by Rebel on Jul 6, 2012 1:13:36 GMT -5
Thanks for posting those, nice bikes.
|
|