|
Post by Rebel on Mar 31, 2012 21:05:35 GMT -5
Some places like Pep Boys have a lot of connectors too.
|
|
|
Post by justbuggin on Apr 1, 2012 12:30:18 GMT -5
there is no pep boys close by
|
|
jmkjr72
contributing staff
Commander 132nd Northern Cav. Division
Posts: 2,779
|
Post by jmkjr72 on Apr 1, 2012 12:41:47 GMT -5
hf has some but price wise you are better off going to a car parts store or if you have a fleet farm or tractor supply heck even menards has some good conectors for a fair price
|
|
|
Post by justbuggin on Apr 1, 2012 19:51:59 GMT -5
i am proboly being anal about this but i am looking for connectors that i can just plug the stator connector and r/r connector up and not use spade connectors
|
|
|
Post by Rebel on Apr 1, 2012 20:13:16 GMT -5
I've seen the kind of connectors you are talking about at autoparts places.
|
|
|
Post by BigCheeseStick on Apr 4, 2012 15:28:07 GMT -5
It looks like you used the fuel tank vent fitting for the fuel return line. How's the tank getting air in it to displace the gas being pumped out? Did you drill a small hole in the top of the gas cap? Even with a pump sucking the fuel out, after a while enough negative pressure would build up to overcome the pump and stall the engine.
|
|
|
Post by justbuggin on Apr 4, 2012 22:54:59 GMT -5
the cap is vented from factory i just got lucky that the tank was setup the way it is the return line was a return from the old petock
|
|
|
Post by BigCheeseStick on Apr 5, 2012 18:20:10 GMT -5
Cool. VERY nice that you can download data and tune accordingly!
|
|
|
Post by justbuggin on Apr 10, 2012 10:54:48 GMT -5
well i finally got all the connectors needed and waiting on the flywheel puller to come in now the idea of using a steering wheel puller did not work the threads in the flywheel for holding the cooling fan wants to pull out o well live and learn
|
|
|
Post by Rebel on Apr 10, 2012 11:02:55 GMT -5
The right tool is very helpful, seems when I went looking for one there were two versions out there an I needed the longer one of the two. Make sure you check out the dimensions.
|
|