|
|
Post by Montanaborn on May 30, 2009 12:02:16 GMT -5
While I was doing some periodic maintenance on the Tank I noticed something that appears to be missing on the engine and I have no idea what it may be. It is just to the left of the carburetor intake and looks as if the hole is threaded. What is missing if anything.  |
|
|
|
Post by harrywr2 on May 30, 2009 13:06:51 GMT -5
|
|
|
|
Post by therustyaxe on May 31, 2009 3:36:21 GMT -5
Harry is right, you should buy a plastic cap or go to the local hardware and buy a bolt that matches the threads.
Any hardware store, Lowes, Home Depot, Ace or anyone will have one that fits.
I think it is an 8mm, I don't remember. I personally don't like plastic caps as they pop off and get lost.
The threads are there for a reason. It will be 8 or 10mm. They are cheap just but them at 5 cents a piece and see which one fits.
|
|
|
|
Post by kuzikood on May 31, 2009 7:44:55 GMT -5
yikes lol the bolt that covers the camchain tensioner screw , i cant belive it fell out i have a hard time gettin it to cme out when i need tyo remove it , if ya cant find one localy it should be less than 1/4 inch long pm me and ill see if i have one and drop it in the mail for ya
|
|
phaze5
Non-Com
First Sargeant, Div. Security, Surveilance, and Interogation
i tell it the way it is sorry
Posts: 156
|
Post by phaze5 on Jun 1, 2009 6:02:11 GMT -5
don't worry its in your garage hahahahaha
|
|
|
|
Post by Montanaborn on Jun 2, 2009 9:00:08 GMT -5
I actually found the missing bolt laying between the carb and engine. Reinstalled it with a star/washer.
|
|
|
|
Post by Rebel on Jun 2, 2009 13:46:25 GMT -5
stroke of luck for you, good.
|
|
CAN YOU HELP ME OUT MAN,AS i LOST ME JOB DUE TO NOT BEING ABLE TO GET THERE?ANY INF