|
Post by sarniarebel on Mar 14, 2011 22:05:38 GMT -5
so today i got my jog 90 engine and its in perfect shape and is very clean. so i went to go prep it to put it in my vino and put the center stand on and it hit some extra bracket, no big deal. i just filed down the block a few MM so the stand would fit but i ran into a new problem. the rim from my Vino wont fit. i figured that since this was a minerali engine that the wheel would fit but was i wrong. i have absoultly no clue what size of rim i need to fit the axle. i think the hub is a 19mm 18 spline. anyone know where to find a rim and to even tell what size i need? i know its a 10" but just not sure the axle size.
|
|
|
Post by Rebel on Mar 15, 2011 1:34:51 GMT -5
I have two suggestions; 1) ask 90gtvert 2) ask jmkjr72
I looked a couple places that have a lot of rims but they were all listed for gy6 motors.
|
|
jmkjr72
contributing staff
Commander 132nd Northern Cav. Division
Posts: 2,779
|
Post by jmkjr72 on Mar 15, 2011 13:06:19 GMT -5
well i know the 100 cc bws uses the same rim as the 50 cc zuma/bws i dont know the diffrence between the vino and zuma rims
i dont know if the rattler 110 uses the same rim as the rought house 50
if i get a chance ill bring home my calipers and pull the rear rim of the zuma and measuer it but im on call to head out of town for work
so i would consider a zuma rim if you got one you can borrow or a ratller 110 rim also
i thought 90gtvert had some zuma rims he bought but im not sure
|
|
|
Post by sarniarebel on Mar 15, 2011 15:56:39 GMT -5
i talked to 90gtvert on another forum about the rims, he linked me to a rim from a eton beamer.so i bought it and can only hope for the best.
|
|
|
Post by 90GTVert on Mar 15, 2011 17:31:35 GMT -5
Sorry, my PC was down. If I'm busier or on a different PC I tend to just get on my site. 50 or 90cc I haven't seen a difference in Chinese minarelli wheels fitting.
|
|
|
Post by Rebel on Mar 15, 2011 17:31:50 GMT -5
keep us filled in on how it goes
|
|
|
Post by sarniarebel on Mar 15, 2011 22:26:28 GMT -5
Will do! Just waiting for my rim and my thottle cable at the moment. I might have to put the project on hold for a bit due to low funds from not working so much because of police training. Blahh
|
|
|
Post by Rebel on Mar 16, 2011 2:24:22 GMT -5
Police training!!! Oh no we have to stop talking about illegal modifications now.
|
|
|
Post by 90GTVert on Mar 16, 2011 9:10:12 GMT -5
The 90cc is probably illegal in most areas unless the scoot will be registered as a motorcycle. lol
|
|
jmkjr72
contributing staff
Commander 132nd Northern Cav. Division
Posts: 2,779
|
Post by jmkjr72 on Mar 16, 2011 10:16:56 GMT -5
dam no more talking about mods guess my zumas going back to stock and getting restricted againg
|
|
|
Post by sarniarebel on Mar 16, 2011 16:17:33 GMT -5
ahahaha don't worry guys. and my bike is probably "illegal" but what they dont know cant hurt
|
|
|
Post by Rebel on Mar 16, 2011 16:36:06 GMT -5
I've heard cops lie a lot just to get you to say something that gets you in trouble
|
|
|
Post by 90GTVert on Mar 16, 2011 18:10:43 GMT -5
lol
|
|
|
Post by Rocketdog on Mar 16, 2011 18:27:05 GMT -5
The 90cc is probably illegal in most areas unless the scoot will be registered as a motorcycle. lol That's right dude. You aren't the law, your just hired to enforce it. Way too many COPS think the are. Sorry for the hard time, but way too many of us have gotten the raw deal. Unjustly I think. Sorry for the thread steal and the political opinion, Rebel. I'll mind my own business now. RD
|
|
|
Post by Rebel on Mar 16, 2011 23:11:18 GMT -5
I think and hope Sarniarebel knows we are just kidding about that stuff.
|
|