|
Post by snakedoctor on Mar 5, 2011 23:00:09 GMT -5
hey guys, I need a 1983 Honda C70 Passport swing arm for my Honda/Scout project. Its got to be a 1983 to work. I have searched the internet and ebay.
If you are wondering why I am not using the scout swing arm...Its 1/4 inch too wide where it bolts to the frame. They had the bushings pushed in too far to kind of take up the slack. Also the metal is so soft the slot on the left side wallowed out.
If any one in their travels should run across some one parting one out give me a shout.
Thanks and have a good one..
|
|
|
Post by Rebel on Mar 5, 2011 23:06:54 GMT -5
I would think you could get one from a motorcycle wrecking yard.
|
|
|
Post by snakedoctor on Mar 6, 2011 8:46:39 GMT -5
I have not located a motorcycle wrecking yard in this area...
|
|
jmkjr72
contributing staff
Commander 132nd Northern Cav. Division
Posts: 2,779
|
Post by jmkjr72 on Mar 6, 2011 9:37:35 GMT -5
www.fullthrottlecycles.com/ they ship www.cyclesalvage.net/index.php if they wont ship they are about an hour from my house or try these guys i think i have had them ship me stuff A1 Used Cycle Parts 946 University Ave W St. Paul, Minnesota 55104 Phone: (651)917-2034 Toll Free: 800-522-7891 Fax: 651-917-2036
|
|
|
Post by snakedoctor on Mar 6, 2011 11:46:05 GMT -5
Thanks, I'll give these guys a shout tomorrow. I also have a couple of other places to call. I can still get a new swing arm but want to save as much money as I can.
edit...
Thanks guys, I found one.
Have a good one
|
|