|
Post by thxcuz on Feb 10, 2017 15:12:28 GMT -5
I posted this in some other forums too I got my head for my xingyue ita 150 today. I placed the rocker assembly on top of it and it doesn't match up Am I missing something? Did I order the wrong part? Are there supposed to be spacers? I'm confused
|
|
|
Post by Rebel on Feb 10, 2017 21:35:03 GMT -5
Where are the cam parts
|
|
|
Post by thxcuz on Feb 10, 2017 21:38:18 GMT -5
The cam is in the box of parts
|
|
|
Post by Rebel on Feb 10, 2017 22:30:18 GMT -5
Your cam goes under the rockers and there is a bottom half to the mount it sits on. On the standard gy6 the bottom cradle for the cam is cast into the head, I don't see that on this head. The top half should easily line up and match with the bottom half.
|
|
|
Post by duckey on Feb 15, 2017 14:26:24 GMT -5
I would say you've got the wrong part. What is the diameter where the cam bearing sits on the head versus that rocker assembly? It's hard to see from that picture, but the radius should match on both pieces.
|
|