|
Post by frankwv on Jul 10, 2016 8:32:59 GMT -5
I am in need of some assistance. My Omni will not start. It has fire, but apparently not enough. I took the coil over to the local scooter shop, but he could not check it, because he said it has a CDI intergrated into it. It did say that the connection going to it should have 60 volts AC when I crank the motor. I checked, it and it only has 32 volts going to it. Does anyone have any suggestions as to where I begin to look for the problem? Thanks!!
|
|
|
Post by Rebel on Jul 11, 2016 14:48:03 GMT -5
Welcome the forum I would replace it, dont think fixing it is for the hobbiest.
|
|
|
Post by frankwv on Jul 14, 2016 18:08:16 GMT -5
Replace what? I talked to the shop owner. He said he has seen them fire with only 20 volts. I did replace the cap, and I have fire, but it is weak. I am going to replace the coil. It's not that expensive. I keep you advised.
|
|
|
Post by Rebel on Jul 15, 2016 1:19:59 GMT -5
The coil was what I was referring to.
|
|