|
|
Post by dwint on Mar 1, 2015 15:46:12 GMT -5
I had some wires melt and was wondering are these two wires for the brake light or for when you pull in the lever to start it.
|
|
jmkjr72
contributing staff
Commander 132nd Northern Cav. Division
Posts: 2,779
|
Post by jmkjr72 on Mar 1, 2015 21:08:02 GMT -5
The brake switch completes the circut so there will always be at least 2 wires one in and one out
The complete circut for the brakes serves 2 purposes it lights the light and also allows the starter to engage
|
|
|
|
Post by dwint on Mar 3, 2015 8:02:34 GMT -5
just took my switch off and it is melted.i ordered another but I don't understand why my blinkers are opposite in the front.that switch doesn't have any thing to do with it does it.my flasher could be bad?
|
|
|
|
Post by Rebel on Mar 3, 2015 22:54:20 GMT -5
I don't understand why my blinkers are opposite in the front. By opposite do you mean when you signal a left turn the right blinker goes on? |
|
|
|
Post by dwint on Mar 5, 2015 19:48:11 GMT -5
yes but I figured it out and I feel stupid but I figured it out.last week I bought a front plastic piece and had to take the blinkers off the old and put them on the new.i wired them right I just put them on the wrong side.cant see the blinkers from where I sit so I never knew they were on wrong.at least I figured it out.talk about something so simple drive you crazy when you know the color coded wires are on right
|
|
CAN YOU HELP ME OUT MAN,AS i LOST ME JOB DUE TO NOT BEING ABLE TO GET THERE?ANY INF