|
Post by merrikii on Jan 23, 2014 12:33:22 GMT -5
I looked up where the circlip was and I found it. It needle only has two lower settings I can move it. Am I supposed to move the clip down or up?
If I move the clip down it will raise the needle correct?
|
|
|
Post by Rebel on Jan 23, 2014 17:37:44 GMT -5
In the middle of the diaphragm there is a needle that extends down the lower ithangs the leaner it is set for.
|
|
|
Post by Rebel on Jan 23, 2014 17:38:50 GMT -5
You want to raise the clip to lower the needle.
|
|
|
Post by craisin on Jan 24, 2014 18:19:17 GMT -5
i bought a brand new 50cc carb a while back as it was the same as the one on my new scooter. the idea being that i could swap carbs and try different settings and jets.
One carb would always go better no matter what i did
i tried swapping the diaphrams around in my supposed same carbs and the slides were different sizes and the carb with smaller slide was th better running carb
the circlip is easy to lose
|
|