|
|
Post by sking3111 on Oct 8, 2013 16:52:20 GMT -5
I rebuild my 04 eton beamer. new top end and bottom and converted to premix. scooter will only run on full choke. Loud winding noise coming from flywheel. Any Suggestions?? |
|
|
|
Post by Rebel on Oct 8, 2013 23:59:04 GMT -5
Jmkjr is the 2 stroke expert here.
I would start with double checking if the carb/intake/reedvalve housing is on good
|
|
jmkjr72
contributing staff
Commander 132nd Northern Cav. Division
Posts: 2,779
|
Post by jmkjr72 on Oct 11, 2013 5:21:23 GMT -5
Top eNd and bottem end so you mean
New bore pistn crank bearings and seals
Did you use stock bore or did you add a big bore
If not alist of what brand and size stuff you used might help
If you did crank and bearings did you run a leak down test
Did you up jet for pre mix
As fir the noise pull the spark plug and turn it over by hand with the fan and fan cover off watch ant listen for anything out of wack
Sorry it took so long to get back lots of things going on here right now
|
|
CAN YOU HELP ME OUT MAN,AS i LOST ME JOB DUE TO NOT BEING ABLE TO GET THERE?ANY INF