|
Post by scootersteven on Dec 19, 2010 14:42:08 GMT -5
|
|
|
Post by scootersteven on Dec 19, 2010 14:42:39 GMT -5
little sawzall action
|
|
wortleees
Recruit
Trasplanted Texan
Posts: 68
|
Post by wortleees on Dec 20, 2010 5:48:16 GMT -5
That looks like an earth mover's tire beside car tire!! Will your stability improve? If you burn out on that you will have a great smoke screen.
|
|
|
Post by scootersteven on Dec 26, 2010 15:10:03 GMT -5
test fit before lowering and stretching
|
|
|
Post by scootersteven on Dec 26, 2010 15:10:48 GMT -5
had alittle clearence issue with the rims offset..
|
|
|
Post by scootersteven on Dec 26, 2010 15:13:12 GMT -5
dremeled that down.. now i got clearence still need to clean it up and make it look better clean it up some and it will be golden my bad bought a rim with to much offset to it... but i wanted the deep dish look lots of lip ...
|
|
|
Post by scootersteven on Dec 31, 2010 12:14:30 GMT -5
got my plastics off the rear and all the wires move so i can cut and chop stretch and lower... its coming along
|
|
|
Post by scootersteven on Dec 31, 2010 12:17:04 GMT -5
|
|
|
Post by Rebel on Dec 31, 2010 13:46:43 GMT -5
I'm glad you are going to fix the off set, that might have helped a lot with the clearance issue you had too. Looking really good though. Now when you hit speed is this tire going to grow and cause more clearance issues? Do you have more pics of how you made the hub adapter?
|
|
|
Post by workdog on Dec 31, 2010 18:50:51 GMT -5
Looks great!
|
|
|
Post by scootersteven on Jan 1, 2011 14:14:18 GMT -5
there is plenty of material left from what i dremeled down ... if need be i will take down a little more if not i can do a few burn outs and take the tire down some
|
|
|
Post by scootersteven on Jan 1, 2011 14:17:39 GMT -5
|
|
|
Post by scootersteven on Jan 1, 2011 14:19:56 GMT -5
i have a freind that does machining and he took down the what was left of the spokes from the rima and balanced it..then we indexed it off a drive shaft so the 4x4 bolt pattern would be on and so i don't have wheel wooble
|
|
|
Post by scootersteven on Jan 1, 2011 14:23:32 GMT -5
there is a little material left on where the spokes of the rim were we used that to balnce it with a bubble balancer is what my buddy called it turn out nice gona paint it and clean it up ...
|
|
|
Post by scootersteven on Jan 1, 2011 14:25:50 GMT -5
|
|